`

Accelerate the unloading process

At Nemag we understand that dry bulk terminal operators are always looking for ways to increase terminal efficiency. This is important for optimising shareholder profits and increasing the competitive edge. Grabs play a crucial role in raising terminal efficiency. That’s why Nemag is proud to introduce the most productive grab for iron ore: nemaX. This new grab for handling iron ore will increase productivity by more than 10%, thereby guaranteeing the most efficient unloading process.

The grab unloading process

The phases in the unloading process
In the transshipment sector, cream digging and free digging rates are generally seen as the key figures for the unloading capacity of a crane. The crane capacity is almost always expressed as a free digging rate, which is the productivity of the crane and the grab as measured from a specific point in the hold, multiplied by the number of cycles per hour. This provides the most reliable measurement. 65% of the unloading time is spent on the last 30% of goods. Meaning, most of the unloading time is not spent on the free digging phase, but the intermediate and trimming phase.

Do you want to know how we managed to accelerate the unloading process in all stages through extensive computer simulations and on-site testing? Our new whitepaper; Most efficient unloading solution, explains this and the results.

Download Whitepaper: Most efficient unloading solution

Contact

We value direct contact with our customers and prospects and are happy to assist them where we can.

Nemag
General contact

+31 111 418 900

You can improve your acceleration with...

...%

Oh my grab!

We can't provide you with calculation as we're not familiar with your current installation. Please send more information to sales@nemag.com so we can assist you.

Compare the grab glossary

Crane capacityIs the Safe Working Load of your crane in tons in grab duty, i.e. the total sum of grab dead weight and payload.

PayloadIs the nett load of cargo in the grab. Because it’s linked with the grab weight it will be filled in automatically.

Grab weightIs the Dead weight of your existing grab. Not sure? Check your grab manual, CE declaration, or on the ID plate on your grab.

Grab rope withdrawal lengthIs the length of the closing rope which needs to be pulled out in order to close the grab (not to confuse with the total reeved in grab rope length).

Not sure about the numbers?Check the grab manual. Don’t hesitate to contact us.

Riny Stoutjesdijk
Sales manager

+31 (0)653109307